Brand new · 5.9L inline six · 250–280HP marine diesel
Cummins 6BTA marine engine, 250–280HP.
Plan your next repower.
Bring a new engine to your next chapter on the water. This Cummins 6BTA5.9 combines mechanical fuel injection, turbocharging, aftercooling and a marine heat exchanger in a complete engine assembly. Start with a specification check so your installer can plan the right package for your vessel.

01 / Match the vessel
A 5.9L marine replacement starts with the details.
For an existing 6BTA installation, send a clear engine-plate photograph, serial number and CPL or SO number. For a new repower, include your vessel details and your marine installer’s requirements. Engine capacity and horsepower alone do not establish compatibility.
| Specification | Listed configuration / ordering check |
|---|---|
| Condition | Brand new marine diesel engine assembly; no exchange engine required. |
| Fuel system | Mechanical inline fuel injection. |
| Induction | Turbocharged and aftercooled. |
| Cooling | Engine-mounted marine heat exchanger; vessel-side cooling connections must be matched. |
| Output & speed | Choose 250 or 280HP above. Rated speed varies by rating. Confirm the supplied engine plate, power units and duty classification in writing. |
| Electrical system | Confirm required voltage, starter, alternator, instruments and wiring. |
| Gearbox & installation | Match flywheel housing, coupling, gearbox model and ratio, mount spacing, clearances and connection locations. |
Marine 6BTA engines exist in several ratings and configurations. Do not assume that another 6BTA, a 6BT industrial engine or a different package at the same horsepower has the same installation specification. A reference rating is not a promise of continuous full-load operation.
02 / Confirm your package
Complete engine. Clear supply details.
The engine package
New 6BTA marine assembly
The listed assembly brings the engine and its marine equipment together. Confirm each included component against the quote and pre-dispatch photographs.
- Engine block, cylinder head and internal assembly.
- Mechanical injection equipment, turbocharger and aftercooling arrangement.
- Marine heat exchanger and engine-mounted cooling components.
- Starter, alternator, filters, flywheel and housing as itemised.
The vessel installation
Plan the parts around it
A complete engine package still needs to be matched to the boat. The following are not included unless specifically itemised on your order.
- Marine gearbox, reduction transmission and coupling.
- Vessel controls, instrument panel and wiring.
- Shaft, propeller and vessel-side exhaust system.
- Installation labour, alignment, fluids and commissioning.
Keep your original engine and accessories until your installer has checked what needs transferring. Ask for the final supply list before booking removal, lifting or installation.
03 / Understand the assembly
Mechanical fuel delivery. Marine cooling.
6BTA / marine assembly / product reference

01Mechanical injection
The listed engine uses mechanical inline fuel injection. Confirm the pump configuration, throttle linkage and stop control against the vessel installation.
02Turbocharging & aftercooling
The turbocharged, aftercooled layout is a key part of this marine package. Match the supplied configuration rather than selecting from displacement alone.
03Heat-exchanger cooling
The engine-mounted heat exchanger forms part of the marine cooling arrangement. Your installer must check the vessel’s water supply, plumbing and exhaust connections.



Compare the full project
New marine engine or a used replacement?
| Option | What to compare before committing |
|---|---|
| This new 6BTA package | New assembly, agreed marine configuration, no core exchange and a one-year product warranty. |
| Used marine engine | Operating hours, service history, inspection findings, cooling-system condition, supplied equipment and written cover. |
| Rebuilt or reconditioned engine | Work performed, components replaced, testing, reuse of marine accessories, any core requirement and warranty terms. |
Compare the total repower cost: engine, gearbox work, lifting, mounts, cooling, exhaust, installation and commissioning. A lower engine price does not tell you the final project cost.
04 / Before you order
Give your marine installer a clear starting point.
Send the engine details
Provide the current engine plate, serial number, CPL or SO number, horsepower and rated speed. Include photographs of the engine room and existing connections.
Check the whole driveline
Supply gearbox make, model and reduction ratio, mount measurements, available space and electrical voltage. Have the shaft, coupling and propeller requirements assessed together.
Confirm duty & documentation
Explain the vessel type, operating load, annual hours and intended duty. Ask for the supplied engine’s rating and documents, and have your marine installer or surveyor confirm the project requirements before purchase.
Professional marine installation and commissioning are essential. Diagnose the original failure, inspect reused components, check valve clearances and follow the supplied engine’s installation and run-in instructions. Retain commissioning and service records.
Marine workshop or trade customer?
Call before ordering to discuss trade pricing and the engine specification. Humm payment options are available to discuss with our team. Confirm supply timing before booking the vessel out of service.
See the business behind your engine
Step inside our warehouse.
Take a look around and see our engine stock and delivery crates for yourself. When you buy a brand new Cummins 6BTA marine engine, there is an Australian team here to help with your engine specification, supply details and repower planning.
Free standard Australian delivery and a 1-year limited warranty are included under our published terms.
05 / Delivery & peace of mind
From our warehouse.
To your next chapter.
Free standard Australian freight. Tracked delivery. A local team behind your Cummins 6BTA.

Delivered Australia-wide.
delivery
For an available engine, allow 1–2 business days for preparation. Confirm the current supply lead time before booking installation. Delivery estimates vary by location and carrier conditions; remote areas may take longer.
Local support. Written cover.
limited warranty
Cover starts when your engine is delivered.
Built around manufacturing quality
Cover for defects in materials and workmanship, including manufacturing faults in the block, head and internal components, subject to the policy.
Coverage & installation essentials
Professional installation and correct run-in are required. The policy excludes normal wear, improper installation, neglect, overheating, lack of lubrication and consequential costs. Read the full terms before installation.
Easy returns
7 days to arrange your return.
Contact us within 7 calendar days of confirmed delivery for an eligible non-warranty return. The engine must be unused, uninstalled and unaltered, with its original packaging intact.
The restocking fee applies to the engine purchase price. You pay return freight, and original shipping costs are deducted from the refund. Returns are inspected before refund approval. Warranty claims follow the separate warranty process.
How delivery works
- Order confirmedYour confirmation arrives by email.
- Prepared in QLDYour engine is packed for freight.
- Track to your doorTracking is emailed at dispatch.
If you need warranty support
- Contact our teamTell us about the issue promptly.
- Guided assessmentWe may request photos or diagnostic reports.
- Next steps agreedIf approved, we arrange inspection and repair or replacement instructions.
06 / Before you buy
Cummins 6BTA marine engine FAQs
Is this Cummins 6BTA marine engine new?
Yes. This listing is for a brand-new marine diesel engine assembly. It is not a used take-out or an exchange-engine offer. The written order confirms the supplied equipment.
Will it replace my existing 6BTA5.9-M2?
The model designation is a starting point. Send the engine plate, serial number, CPL or SO number, gearbox details and installation photographs so the supplied configuration can be checked. Matching displacement alone is not enough.
Which model number will my engine have?
Marine 6BTA engines are often listed by rating, for example 6BTA5.9-M250 for the 250HP version. Choose your horsepower above, then confirm the exact model, rating and configuration from the supplied engine documents.
Does the engine include a marine gearbox?
A gearbox or reduction transmission is not included unless itemised in your written quote. Send the make, model and ratio of your existing gearbox so the required connection can be checked.
Can I run it at full rated power continuously?
Do not assume that the advertised power is a continuous-duty rating. Confirm the supplied engine’s duty classification, rated speed and permitted operating profile for your vessel before ordering.
Are certification and technical documents included?
Ask our team which serial-specific documents are available for the supplied engine. Have your marine surveyor or installer confirm the documentation needed for your vessel and project before purchase.
Is this the same as the 6BT engine listing?
No. This page covers the turbocharged and aftercooled marine package. The separate Cummins 6BT listing has its own supply options and specification; it is not an automatic marine substitute.
What delivery and warranty are included?
Free insured standard Australian freight and a one-year product warranty are included under our published terms. The product warranty is not a labour warranty. Confirm availability and delivery arrangements before scheduling installation.
Useful next steps
Ready to plan your repower?
Let’s match your 6BTA marine engine.
Send your engine plate, gearbox information and vessel details. We’ll help confirm the supplied configuration, availability and next steps.


Reviews
There are no reviews yet.